Before carrying out the work make
sure you are confident you know what you are doing... If
you have any questions feel free to ask them on our discussion
forum. Remember if you don't feel
confident about what you are doing take the bike to a qualified
Unlock the helmet lock
and push the lever to release the seat. Remove the seat.
Use the allen key in
the toolkit to undo and remove the bolt holding the head of the
tank in place.
Swivel the tank up and
secure it on it's rod.
This is the 2 stroke reservoir.
Undo the cap and fill to the top with oil. Replace the cap.
Push the tank back
into place and replace the screw.
Place the seat back on
the bike and push into place.