Top up coolant fluid

Before carrying out the work make sure you are confident you know what you are doing... If
you have any questions feel free to ask them on our discussion forum. Remember if you don't feel
confident about what you are doing take the bike to a qualified mechanic.

	Unlock the helmet lock and push the lever to release the seat. Remove the seat.
	Use the allen key in the toolkit to undo and remove the bolt holding the head of the tank in place.
	Swivel the tank up and secure it on it's rod.
	Check the level of the coolant on the gauge of the reservoir. If the level is low add coolant until the level rises to halfway between the two markers.
	Push the tank back into place and replace the screw.
	Place the seat back on the bike and push into place.